Learn more about the basics of how underfloor heating works.
Learn more about the basics of how underfloor heating works.
If you are installing the FOIL product under carpet you may be wondering if you can feel the product through the carpet. Good question! Learn more here.
If you are installing the FOIL product under carpet you may be wondering if you can hear the product. Great question! Learn more here.
If you are installing the DCM-PRO cable in your home you may be wondering about the diameter of the cable? Find this information and more here.
Are you looking to offset heat loss in your home with a Warmup system? This conversion and information will be important for you.
If you have a Tempo thermostat there is an air probe and floor probe. If you would like to change the probe you are operating off of you can learn how here.
The California Title 24 Building Energy Efficiency Standards are designed to ensure new and existing buildings achieve energy efficiency and preserve outdoor and indoor environmental quality. We have included below useful information regarding underfloor heating and Title 24. To ensure compliance, please consult with a building professional.
So either the installer puts a DIN rail on the wall or cabinet, or they can utilize the four mounting holes in the corners of the housing and screw it to a surface.
Warmup strongly recommends that the relay is installed in a separate single gang box to avoid overheating and interference of other cables. Check with your electrician and refer to your local code for specific installation requirements.
Thermostats with an internal GFCI including the Warmup 4iE and WUDG will fulfill this requirement. If a non-GFCI thermostat like our Tempo thermostat is being used, a GFCI breaker will be required. Consult with your local electrician to make sure your installation is properly protected and meets National and Local Electrical Code.