This page explains the different circumstances in which you might wire your Towel Warmer to a switch or to a thermostat.
This page explains the different circumstances in which you might wire your Towel Warmer to a switch or to a thermostat.
This post explains the size requirements of the image file you are trying to upload as a 4iE background.
This page explains how to determine which voltage to run to your DCM-PRO heating system.
Outlined description of when to test your DCM-PRO cable and why you should do it.
This page states that Warmup Mirror Defoggers are not recommended for use in showers.
This page outlines the recommended installation methods for your installing your sensor probe.
This page explains the positioning of the factory joint to ensure a successful installation of your Warmup heating system.
The conductor cores and ground braid of the 10′ cold lead are factory joined in a water resistant joint assembly to each supply conductor and ground conductor of the unheated lead.
The cold tail lead and the sensor probe should be run in separate conduits. This will prevent any interference from the cold tail lead affecting the temperature readings from the sensor probe.
This page describes the composition of the DCM-PRO cable and the different components that make up this heating system.